Vibe L4-1.8L VIN L (2003)
1. Install the CMP sensor (2) into the cylinder head.
2. Install the two CMP sensor hold-down bolts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the hold-down bolts to 9 N.m (80 lb in).
3. Connect the electrical connector (1) to the CMP sensor.
4. Install the engine cover (1) to the engine.
5. Secure the engine cover (1) with the four fasteners.
Tighten
Tighten the fasteners to 7 N.m (62 lb in).