Vibe L4-1.8L VIN L (2003)
Important: A small amount of clutch material in the bottom of the transaxle fluid pan is a normal condition and is consistent with normal transaxle
wear. The bottom of the fluid pan is equipped with 2 magnets that will collect minute metal filings. However. if large amounts of clutch material,
metal shavings or other foreign matter are present, disassembly and inspection of the transaxle is indicated.
8. Clean the transaxle fluid pan magnets and the bottom of the transaxle fluid pan.
9. Clean the gasket material from the fluid pan-to-case mating surfaces.
Installation Procedure
1. Install a new O-Ring (1) on the fluid filter.
2. Coat the O-ring with transmission fluid.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the fluid filter screen to the valve body assembly. Secure the screen with 3 bolts.
^
Tighten all the fluid filter screen bolts to 11 Nm (97 inch lbs.).
