Vibe L4-1.8L VIN L (2003)
Overdrive Switch: Service and Repair
MU4
Overdrive Switch Replacement
^
Tools Required
-
J 38125-B Terminal Repair Kit
Removal Procedure
1. Remove the manual selector from vehicle.
2. Remove the push clip (1) from the manual selector plate, then remove the wire harness.
3. Disconnect the connector (2) from the manual selector plate.
4. Using the terminal removal tool from J 38125-B, remove the 2 white OVERDRIVE switch wires (2) from the OVERDRIVE switch/manual
selector illumination lamp electrical connector (1).
