Vibe L4-1.8L VIN L (2003)
Shifter M/T: Service and Repair
MTN
Gearshift Selector Assembly Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Remove the knob.
3. Remove the center instrument trim panel.
4. Remove the instrument compartment.
5. Remove the front floor console.
6. Remove the clip and washer, then disconnect the cable end from the shift lever assembly.
7. Turn the cable lock, then disconnect the shift cable from the shift lever assembly.