Vibe L4-1.8L VIN L (2003)
Notice:
Unhook the clip before unhooking the claw to prevent breaking the bracket garnish.
4.
Remove the clip and unhook the claws to remove the front door lower frame bracket garnish.
Notice:
Wrap protective tape around the head of the flathead screwdriver to avoid scratching the power window switch or trim board.
5.
Using a flathead screwdriver with protective tape wrapped around the head remove the six (6) clips and claws to separate the power window
switch.
6.
Remove the power window switch:
^
For LH - Unlock and remove the connector. Refer to the illustration.
^
For RH (with door lock switch) - Disconnect the two (2) connectors