Vibe L4-1.8L VIN L (2003)
11.
Install the front door trim. Refer to Trim Panel Replacement - Side Front Door in SI.
12.
Close the window and leave closed for 24 hours. This will allow the weatherstrip to set.
Rear Door Glass Weatherstrip
1.
Lower the window.
2.
Remove the rear side door trim. Refer to Trim Panel Replacement - Side Rear Door in SI.
3.
Remove the water deflector.
4.
Remove the window run channel weatherstrip from the guide channel.
5.
Clean the guide channel of any debris.
6.
Partially raise the glass.
7.
Install the window run channel weatherstrip into the guide channel in the door.
8.
Install the window channel weatherstrip into the corners of the window opening before installing the center part of the strip.
9.
Install the water deflector.
10.
Install the rear side door trim. Refer to Trim Panel Replacement - Side Rear Door in SI.
11.
Close the window and leave closed for 24 hours. This will allow the weatherstrip to set.
Parts Information
Warranty Information
