Vibe AWD L4-2.4L (2009)
Hood Latch Release Cable: Service and Repair
Hood Primary Latch Release Cable Replacement
Hood Primary Latch Release Cable Replacement
Removal Procedure
1. Raise and suitably support the hood.
2. Remove the hood secondary catch and primary latch. Refer to Hood Primary and Secondary Latch Replacement (See: Hood Latch/Service and
Repair).
3. Remove the hood primary latch cable release lever. Refer to Hood Primary Latch Release Cable Handle Replacement (See: ).
4. Using a taped flat-bladed tool, disconnect the hood latch cable clamps.
5. Pull the cable at the grommet (1) from the engine compartment and remove it.
Installation Procedure