Vibe AWD L4-2.4L (2009)
4. Remove the recirculation actuator. Refer to Air Inlet Valve Actuator Replacement (See: Air Door/Air Door Actuator / Motor/Service and Repair
).
5. Remove the passenger compartment air filter. Refer to Passenger Compartment Air Filter Replacement (See: Cabin Air Filter/Service and Repair
).
6. Remove the blower motor resistor. Refer to Blower Motor Resistor Replacement (See: Blower Motor Resistor/Service and Repair).
7. Remove the blower motor. Refer to Blower Motor Replacement (See: Blower Motor/Service and Repair).
Installation Procedure
1. Install the blower motor. Refer to Blower Motor Replacement (See: Blower Motor/Service and Repair).
2. Install the blower motor resistor. Refer to Blower Motor Resistor Replacement (See: Blower Motor Resistor/Service and Repair).
3. Install the passenger compartment air filter. Refer to Passenger Compartment Air Filter Replacement (See: Cabin Air Filter/Service and Repair).
4. Install the recirculation actuator. Refer to Air Inlet Valve Actuator Replacement (See: Air Door/Air Door Actuator / Motor/Service and Repair).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Install the three screws (2).
6. Install the screw (1) and engage the PTC quick heater connector, if equipped.