Vibe AWD L4-2.4L (2009)
Fluid - A/T: Testing and Inspection
MVA 4 Speed - Automatic Transmission
Transmission Fluid Check
Transmission Fluid Level and Condition Check
Inspection Procedure
Note: Drive the vehicle so that the engine and transaxle are at normal operating temperature 70 to 80°C (158 to 176°F).
1. Park the vehicle on a level surface and set the parking brake.
2. With the engine idling and the brake pedal depressed, move the shift lever to all positions from P to L. Then return it to P.
3. Pull out the dipstick and wipe it clean.
4. Push it back fully into the pipe.
5. Pull it out again and check that the fluid level is within the HOT range. If the fluid level is below the HOT range, add new fluid and recheck the
fluid level. If the fluid level exceeds the HOT range, drain the fluid once, add a proper amount of new fluid and recheck the fluid level.
Transmission Fluid Level and Condition Check
Transmission Fluid Level and Condition Check
Inspection Procedure
Note: Drive the vehicle so that the engine and transaxle are at normal operating temperature 70 to 80°C (158 to 176°F).