Vibe FWD L4-1.8L (2010)
Fluid - M/T: Service and Repair
MVC 5 Speed - Manual Transmission
Transmission Fluid Replacement
Removal Procedure
1. Remove the filler plug and the gasket.
2. Remove the drain plug and gasket, and then drain the manual transaxle oil.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install a new gasket and drain plug and tighten to 49 Nm (36 lb ft).
2. Add manual transaxle oil to the proper level (a).
