Vibe FWD L4-1.8L (2010)
Tire Pressure Sensor: Testing and Inspection
Tire Pressure Indicator Sensor Learn
It is necessary to register the sensor IDs in the tire pressure control module, when replacing any of the sensors and/or the control module.
Prepare all sensor ID data before starting registration procedure.
1. Read and record the sensor IDs that are stored in the control module. If sensor IDs cannot be read due to component malfunctions, remove the tires
from the wheels and record the IDs located on the sensors.
Important: When replacing a sensor, record the 7-digit ID number on the sensor.
2. With the scan tool, input the sensor IDs and transmit them to the control module.
3. Confirm that the tire pressure data is displayed for all tires.
4. Confirm that the tire pressure warning light is Off.
