Vibe FWD L4-1.8L (2010)
Note: Do not twist the O-ring.
1. Apply a light coat of engine oil to a new O-ring (1) and install it onto the camshaft timing oil control valve assembly.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the camshaft timing oil control valve assembly and wire harness bracket with the bolt (2) and tighten to 10 Nm (7 lb ft).
3. Connect the camshaft timing oil control valve assembly connector (1).