Vibe FWD L4-1.8L (2010)
Fuel Line Coupler: Service and Repair
Metal Collar Quick Connect Fitting Service
Metal Collar Quick Connect Fitting Service
Special Tools
J 43178 Fuel Line Disconnect Tool
Removal Procedure
Note: Before servicing fuel system connections, relieve the fuel system pressure. Refer to Fuel Pressure Relief (See: Fuel Filter/Fuel Pressure
Release/Service and Repair).
Diagram
1. Grasp both sides of the fitting. Twist the female connector 1/4 turn in each direction in order to loosen any dirt within the fitting.
Warning
Wear safety glasses when using compressed air, as flying dirt particles may cause eye injury.
2. Blow any dirt out of the fitting using compressed air.
3. Insert the J 43178 tool into the female connector. Push the tool inward in order to release the locking tabs.