Vibe FWD L4-1.8L (2010)
1. Install a new gasket (1) onto the intake manifold.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution)
2. Install the throttle body assembly with the 2 bolts and 2 nuts and tighten to 10Nm (7 lb ft).
3. Connect the 2 water by-pass hoses (2) and the throttle body connector (1).
4. Install the air cleaner cap sub-assembly with hose and lock the 2 clamps.