Vibe FWD L4-1.8L (2010)
Camshaft Position Sensor: Service and Repair
Camshaft Position Sensor Replacement - Exhaust
Camshaft Position Sensor Replacement - Exhaust
Removal Procedure
1. Remove the engine cover. Refer to Engine Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Cover Replacement).
2. Disconnect the duty vacuum switching valve connector (3) and the 3 engine wire harness clamps.
3. Disconnect the camshaft position sensor connector (1).