Vibe FWD L4-1.8L (2010)
Fuel Pressure: Testing and Inspection
Fuel Pressure Gage Installation and Removal
Fuel Pressure Gage Installation and Removal
Special Tools
*
J 34730-1A Fuel Pressure Gage
*
J 42982 Fuel Pressure Gage Adapter
*
J 43178 Fuel Line Disconnect Tool
Installation Procedure
1. Relieve the fuel pressure. Refer to Fuel Pressure Relief (See: Fuel Filter/Fuel Pressure Release/Service and Repair).
2. Remove the engine cover.
3. Remove the quick connect coupling cover of the fuel feed hose.
4. Using the J 43178 , disconnect the quick connect coupling of the fuel feed hose from the fuel feed pipe of the fuel rail. Use a shop towel in order
to catch any remaining fuel that may leak. Refer to Metal Collar Quick Connect Fitting Service (See: Fuel Delivery and Air Induction/Fuel Line
Coupler/Service and Repair/Metal Collar Quick Connect Fitting Service).
5. Install the J 42982 between the fuel feed pipe of the fuel rail and of the fuel feed hose.
6. Install the J 34730-1A to the J 42982 , and tighten securely.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution)
7. Connect the negative battery cable. Tighten the retainer for the negative battery cable terminal to 15 Nm (11 lb ft).
