Vibe FWD L4-1.8L (2010)
4. Remove the 3 SDM fasteners (1).
5. Remove the SDM assembly (2) from the vehicle.
Installation Procedure
1. Install the SDM assembly (2) into the vehicle, taking care to ensure that the connectors are pointing toward the rear of the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the 3 SDM fasteners (1).
Tighten the fasteners to 18 Nm (13 lb ft).
