Vibe FWD L4-1.8L (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the front seat belt retractor (6) to the vehicle. Secure the retractor with the upper bolt (2) and the lower bolt (5).
*
Tighten the front seat belt retractor upper mounting bolt to 5 Nm (44 lb in).
*
Tighten the front seat belt retractor lower mounting bolt to 41 Nm (30 lb ft).
2. Connect the pretensioner electrical connector (1).
