Vibe FWD L4-1.8L VIN 8 (2004)
Seat Cushion: Procedures
Seat Cushion Cover Replacement - Front
SEAT CUSHION COVER REPLACEMENT - FRONT
REMOVAL PROCEDURE
1. Remove the front seat assembly.
2. Remove the adjuster knob clip and adjuster knob, if equipped.
3. Cut the hog rings (3).
4. Remove the following components from the seat cushion:
-
The hog rings (3)
-
The seat cushion cover (1)
5. Remove the seat cushion pad from the frame, if necessary.
INSTALLATION PROCEDURE
1. Install the seat cushion pad to the frame, if removed.
2. Install the seat cushion cover (1) to the seat cushion. Secure the cover with new hog rings (3).
3. Install the adjuster knob and clip, if removed.
4. Install the front seat assembly.
Seat Cushion Replacement - Front
SEAT CUSHION REPLACEMENT - FRONT
REMOVAL PROCEDURE
The front seat cushion replacement is part of the seat cushion cover replacement procedure. Refer to Seat Cushion Cover Replacement - Front in
Seats.
Seat Cushion Replacement - Rear
SEAT CUSHION REPLACEMENT - REAR