Vibe FWD L4-1.8L VIN 8 (2004)
1. Install the seat cushion pad to the frame, if removed.
2. Install the seat cushion cover (1) to the seat cushion. Secure the cover with new hog rings (3).
3. Install the adjuster knob and clip, if removed.
4. Install the front seat assembly. Refer to Seat Replacement - Front Bucket (See: Service and Repair/Seat Replacement - Front Bucket) .
Seat Cushion Replacement - Front
Seat Cushion Replacement - Front
Removal Procedure
The front seat cushion replacement is part of the seat cushion cover replacement procedure. Refer to Seat Cushion Cover Replacement - Front (See: Seat
Cushion Cover Replacement - Front) in Seats.
Seat Cushion Replacement - Rear
Seat Cushion Replacement - Rear
Removal Procedure
1. Remove the rear seat back trim panel. Refer to Trim Panel Replacement - Rear Seat Back (Left) (See: Service and Repair/Trim Panel
Replacement - Rear Seat Back (Left))Trim Panel Replacement - Rear Seat Back (Right) (See: Service and Repair/Trim Panel Replacement - Rear
Seat Back (Right)) .
2. Remove the 2 pivot bolts (2).
3. Remove the 2 lower mounting bolts (4).
4. Pull the rear seat cushion forward in order to remove the cushion from the vehicle.
Installation Procedure
1. Slide the rear seat cushion into position. Ensure that the seat belt buckles are properly position through the cushion.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the 2 lower mounting bolts (4)
Tighten the lower mounting bolts (4) to (41 N.m and 30 lb ft).