Vibe FWD L4-1.8L VIN 8 (2004)
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the screws (3) and washers (2) to the roof spoiler (1).
Tighten the roof spoiler screws to 5 N.m (44 lb in).
3. Install the inner plugs (4) to the lift gate.
Spoiler Replacement - Rear (Mid)
Spoiler Replacement - Rear (Mid)
Removal Procedure
1. Open the lift gate.
2. Remove the lift gate trim panel. Refer to Trim Panel Replacement - Lift Gate (See: Interior Moulding / Trim/Trim Panel/Service and Repair) in
Body Rear End.
3. Remove the 4 inner plugs (3 from the left and right sides of the lift gate.
4. Remove the screws (2) and washers (1) from the left and right sides of the mid spoiler.
5. Remove the mid spoiler from the lift gate.
Installation Procedure