Vibe FWD L4-1.8L VIN 8 (2004)
11. With the engine OFF gradually apply and release the brake pedal several times in order to position the caliper pistons and the brake pads.
12. Fill the master cylinder reservoir. Refer to Master Cylinder Reservoir Filling in Hydraulic Brakes. See: Hydraulic System/Brake Master
Cylinder/Service and Repair/Master Cylinder Reservoir Filling
13. Bleed the brake system. Refer to Hydraulic Brake System Bleeding in Hydraulic Brakes. See: Hydraulic System/Brake Master Cylinder/Service
and Repair
Brake Caliper Bracket Replacement- Front
Brake Caliper Bracket Replacement - Front
Removal Procedure
1. Remove the disc brake hardware and pads. Refer to Disc Brake Hardware Replacement - Front.
2. Remove the 2 bolts (1).
3. Remove the bracket.
Installation Procedure
Notice: Refer to Fastener Notice in Cautions and Notices.
1. Install the bracket and the 2 bolts (1).
Tighten
Tighten the bolts to 106.8 N.m (78.77 lb ft).
2. Install the disc brake hardware and pads. Refer to Disc Brake Hardware Replacement - Front. See: Disc Brake Hardware Replacement - Front
Disc Brake Hardware Replacement - Front
