Vibe FWD L4-1.8L VIN 8 (2004)
Radiator Hose: Service and Repair
Inlet
Radiator Hose Replacement- Inlet
Removal Procedure
1. Drain the cooling system.
2. Loosen and remove the radiator inlet hose from the radiator.
3. Disconnect the PCV hose to gain access to the radiator inlet hose at the cylinder head.
4. Loosen and remove the radiator inlet hose from the cylinder head.
5. Remove the radiator hose.
Installation Procedure
1. Position the radiator hose.
2. Install the radiator inlet hose clamp at the cylinder head.
3. Connect the PCV hose.
4. Install the radiator inlet hose clamp at the radiator.
5. Refill the cooling system.
