Vibe FWD L4-1.8L VIN 8 (2004)
8. Install the J 34730-1A to the J 42982 , and tighten securely.
Notice: Refer to Fastener Notice .
9. Connect the negative battery cable.
Tighten the retainer for the negative battery cable terminal to 15 Nm (11 lb ft).
10. Turn ON the ignition in order to pressurize the fuel system.
11. Turn OFF the ignition.
12. Check for any fuel leaks.
Removal Procedure
1. Relieve the fuel pressure. Refer to the Fuel Pressure Relief (FWD) (See: Fuel Pressure Relief Procedure)Fuel Pressure Relief (AWD) (See: Fuel
Pressure Relief Procedure).