Vibe FWD L4-1.8L VIN 8 (2004)
Fuel Pressure Release: Service and Repair
Fuel Pressure Gage Installation and Removal
Fuel Pressure Gage Installation and Removal
Tools Required:
*
J 34730-1A Fuel Pressure Gage
*
J 42982 Fuel Pressure Gage Adapter
*
J 43178 Fuel Line Disconnect Tool
Installation Procedure
1. Relieve the fuel pressure. Refer to Fuel Pressure Relief (FWD) (See: Fuel Pressure Relief Procedure)Fuel Pressure Relief (AWD) (See: Fuel
Pressure Relief Procedure).
2. Remove the 2 fasteners.
3. Remove the 2 plastic retainers.
4. Remove the engine cover (1) from the engine.
5. Remove the quick connect coupling cover of the fuel feed hose.
6. Using the J 43178 , disconnect the quick connect coupling of the fuel feed hose from the fuel feed pipe of the fuel rail. Use a shop towel in order
to catch any remaining fuel that may leak. Refer to Metal Collar Quick Connect Fitting Service (See: Fuel Line Coupler/Service and
Repair/Quick Connect Fitting(S) Service (Metal Collar)).
7. Install the J 42982 between the fuel feed pipe of the fuel rail and of the fuel feed hose.
