Vibe FWD L4-1.8L VIN 8 (2004)
10. Connect the 4 solenoid electrical connectors.
11. Install the oil filter and the 3 bolts.
Tighten the bolts to 10 Nm (89 inch lbs.).
12. Clean and install the 2 magnets on the oil pan.
13. Install a new gasket on the oil pan, then install the oil pan to the transaxle. Secure the oil pan with 18 bolts.
Tighten the transaxle oil pan bolts to 6 Nm (53 inch lbs.).
14. Install a new oil pan drain plug.
Tighten the transaxle oil pan drain plug to 18 Nm (14 ft. lbs.).
15. Install the left engine splash shield.
16. Lower the vehicle.
17. Connect the negative (?) battery cable.
18. Refill the transaxle as necessary.
