Vibe FWD L4-1.8L VIN 8 (2004)
Fuel Pressure: Testing and Inspection
Fuel Pressure Gage Installation and Removal
FUEL PRESSURE GAGE INSTALLATION AND REMOVAL
TOOLS REQUIRED:
-
J 34730-1A Fuel Pressure Gage
-
J 42982 Fuel Pressure Gage Adapter
-
J 43178 Fuel Line Disconnect Tool
INSTALLATION PROCEDURE
1. Relieve the fuel pressure. Refer to Fuel Pressure Relief Procedure.
2. Remove the 2 fasteners.
3. Remove the 2 plastic retainers.
4. Remove the engine cover (1) from the engine.
5. Remove the quick connect coupling cover of the fuel feed hose.
6. Using the J 43178, disconnect the quick connect coupling of the fuel teed hose from the fuel feed pipe of the fuel rail. Use a shop towel in order to
catch any remaining fuel that may leak.
7. Install the J 42982 between the fuel feed pipe of the fuel rail and of the fuel feed hose.