Vibe FWD L4-1.8L VIN 8 (2004)
6. Slide the steering column upper cover, release the 3 claws (2) and remove the steering wheel module coil (1).
INSTALLATION PROCEDURE
1. Ensure the front wheels are in the straight ahead position.
IMPORTANT: Make sure the turn signal switch is in the neutral position or turn signal switch pin may be damaged.
2. Place turn signal switch in neutral position.
IMPORTANT: When installing a new steering wheel module coil, remove the lock pin prior to installing the handle.
3. Install the steering wheel module coil (1), engage all 3 retaining claws (2).
4. Center the steering wheel module coil, if necessary. Refer to Inflatable Restraint Steering Wheel Module Coil Centering in Steering Wheel and
Column.