Vibe FWD L4-1.8L VIN 8 (2004)
1. Install the seat belt buckle (2) to the front seat. Secure the buckle with the bolt (3).
Tighten
Tighten the front seat belt buckle bolt to 42 N.m (31 lb ft).
2. Install the inner adjuster finish cover (4) to the front seat. Secure the cover with the 2 screws (1).
3. Connect the seat belt switch electrical connector (2).
4. Install the front floor rear console.
5. Return the front seat (1) to the upright position, if the left front buckle was removed.