Vibe FWD L4-1.8L VIN 8 (2004)
Impact Sensor: Service and Repair
Front End Discriminating Sensor Replacement - Right
INFLATABLE RESTRAINT FRONT END DISCRIMINATING SENSOR REPLACEMENT - RIGHT
REMOVAL PROCEDURE
1. Disable the SIR system.
2. Remove the front end discriminating sensor - right electrical connector (2).
3. Remove the front end discriminating sensor - right fasteners (3).
4. Remove the front end discriminating sensor (1).
INSTALLATION PROCEDURE
1. Install the front end discriminating sensor (1).
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the front end discriminating sensor - right fasteners (3).
Tighten
Tighten the fasteners to 8 N.m (71 lb in).
3. Install the front end discriminating sensor - right electrical connector (2).
4. Enable the SIR system.
