Vibe FWD L4-1.8L VIN 8 (2004)
4. Install the manual selector knob onto manual selector assembly, then install the shift button.
5. Fully seat the manual selector knob on the assembly, then tighten the 2 screws.
6. Install the 2 white OVERDRIVE switch wires into the OVERDRIVE switch/manual selector illumination lamp electrical connector (2).
7. Hook the 2 white OVERDRIVE switch wires onto the clip (1) on the manual selector base, then secure with a push clip.
8. Install the OVERDRIVE switch/manual selector illumination lamp electrical connector (2) into the manual selector assembly.
9. Install the manual selector assembly into vehicle.