Vibe FWD L4-1.8L VIN 8 (2004)
8. Install the outlet pipe fitting (1) to the pump.
Tighten the fitting to 41 Nm (30.2 ft. lbs.).
9. Install the outlet pipe clamp bolt (2).
Tighten the bolt to 7.8 Nm (69.04 inch lbs.).
10. Install the right front tire and wheel assembly to the vehicle.
11. Lower the vehicle.
12. Fill the reservoir.
13. Inspect the power steering system for leaks. Repair as necessary.
14. Install the right front engine splash shield.
Notice:
Refer to Air in the Power Steering System Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Air In the Power Steering System Notice
15. Bleed the power steering system.
