Vibe FWD L4-1.8L VIN 8 (2004)
Pressure Regulating Solenoid: Service and Repair
Solenoids and Wiring Harness Replacement
1. Caution: Refer to Battery Disconnect Caution in Service Precautions.
Disconnect the negative (?) battery cable.
2. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
3. Remove the left engine splash shield.
4. Place a drain pan or a suitable container under the transaxle fluid pan.
5. Allow the transaxle to cool, if necessary. Remove the transaxle drain plug (2) from the transaxle fluid pan.
6. Remove the following components from the transaxle:
^
The 18 bolts
^
The fluid pan
^
The fluid pan gasket
7. Remove the 3 oil filter retaining bolts, then the filter.
8. Disconnect the 4 solenoid connectors.
9. Remove the manual detent spring.
