Vibe FWD L4-1.8L VIN 8 (2004)
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the fluid filter screen to the valve body assembly. Secure the screen with 3 bolts.
Tighten all the fluid filter screen bolts to 11 Nm (97 inch lbs.).
4. Install the magnets (1) in the fluid pan
5. Install the new transaxle fluid pan gasket and transaxle fluid pan to the transaxle. Secure with 19 bolts.
Tighten the transaxle fluid pan bolts to 8 Nm (70 inch lbs.).
6. Install the transaxle pan drain plug into the transaxle fluid pan.
Tighten the transaxle drain plug to 49 Nm (36 ft. lbs.).
7. Remove the drain pan from under the transaxle.
8. Install the left splash shield.
9. Lower the vehicle.
10. Refill the transaxle, as necessary. Refer to Fluid Capacity Specifications.
