Vibe FWD L4-1.8L VIN 8 (2004)
6. Remove 3 bolts and the fluid filter screen from the valve body.
7. Inspect the bottom of the fluid pan for any large pieces of metal or other foreign matter.
Important: A small amount of clutch material in the bottom of the transaxle fluid pan is a normal condition and is consistent with normal
transaxle wear. The bottom of the fluid pan is equipped with 2 magnets that will collect minute metal filings. However, if large amounts of clutch
material, metal shavings or other foreign matter are present, disassembly and inspection of the transaxle is indicated.
8. Clean the transaxle fluid pan magnets and the bottom of the transaxle fluid pan.
9. Clean the gasket material from the fluid pan-to-case mating surfaces.
Installation Procedure
1. Install a new O-Ring (1) on the fluid filter.
2. Coat the O-ring with transmission fluid.
