Vibe FWD L4-1.8L VIN 8 (2004)
Clutch Pedal Assembly: Service and Repair
Clutch Pedal Replacement
Clutch Pedal Replacement
Removal Procedure
1. Caution: Refer to Battery Disconnect Caution in Cautions and Notices.
Disconnect the negative battery cable.
2. Remove the Lower Instrument Panel. Refer to Instrument Panel (I/P) Trim Panel Replacement - Lower.
3. Remove the clevis clip and the pin.
4. Disconnect the Clutch Pedal Position (CPP) switch electrical connector.
5. Disconnect the Cruise Control Release (CCR) switch electrical connector.
6. Remove the 2 pedal assembly bracket retaining nuts and the 1 retaining bolt.