Vibe FWD L4-1.8L VIN 8 (2004)
Overdrive Switch: Service and Repair
MU5
Overdrive Switch Replacement
Removal Procedure
1. Remove the manual selector from vehicle.
2. Remove the push clip (1) from the manual selector plate, then remove the wire harness.
3. Disconnect the connector (2) from the manual selector plate.
4. Using a terminal removal tool, remove the 2 white OVERDRIVE switch wires (2) from the OVERDRIVE switch/manual selector illumination
lamp electrical connector (1).
5. Loosen the 2 manual selector knob retaining screws.
