Vibe FWD L4-1.8L VIN 8 (2004)
tape can be reused.
17.
Remove the butyl tape from the door panel.
18.
Without removing the butyl tape from the service hole cover place approximately 1 m (39 in) of NEW butyl tape along the door panel side.
19.
Reattach the front door service hole cover while avoiding wrinkles, and then firmly press down the cover to ensure the cover completely adheres.
20.
Secure the trim board in place with the eight (8) clips.
21.
Reinstall the trim board with the screw.
22.
Reinstall the cover for the inside handle.
23.
Reinstall the door pull handle with the screw.
24.
Reconnect the power window regulator master switch assembly:
