Vibe FWD L4-1.8L VIN 8 (2004)
Front Door Window Regulator: Service and Repair
Window Regulator Replacement - Front Door
Removal Procedure
1. Remove the front door window. Refer to Window Replacement - Front Door (See: Window Glass/Front Door Window Glass/Service and Repair)
.
2. Disconnect the power window motor electrical connector, if equipped.
3. Remove the following components from the door:
*
The 6 bolts (1)
*
The window regulator (2)
Installation Procedure
1. Apply a multipurpose grease to all lubrication and sliding points.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the window regulator (2) to the door (3). Secure the regulator with the 6 bolts (1).
Tighten the regulator bolts to 8 N.m (71 lb in).
3. Connect the power window motor electrical connector, if equipped.
4. Install the front door window. Refer to Window Replacement - Front Door (See: Window Glass/Front Door Window Glass/Service and Repair) .