Vibe FWD L4-1.8L VIN L (2005)
Antenna Cable: Service and Repair
Antenna Extension Cable Replacement
ANTENNA EXTENSION CABLE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the right front carpet retainer. Refer to Carpet Replacement in Interior Trim.
2. Adjust the carpet for access.
3. Disconnect the antenna extension cable (1) from the antenna cable (2).
4. Remove the instrument panel (I/P) storage compartment. Refer to Compartment Replacement - Instrument Panel (I/P) in Instrument Panel, Gages,
and Console.
5. Remove the radio. Refer to Radio Replacement.
6. Cut off the visible ends of the antenna extension cable.
INSTALLATION PROCEDURE
1. Route the antenna extension cable. Secure the cable.
2. Connect the antenna extension cable to the radio. Install the radio. Refer to Radio Replacement.
3. Install the I/P storage compartment. Refer to Compartment Replacement - Instrument Panel (I/P) in Instrument Panel, Gages and Console.