Vibe FWD L4-1.8L VIN L (2005)
Global Positioning System Module: Service and Repair
COMMUNICATION INTERFACE MODULE REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the battery ground cable.
IMPORTANT: The vehicle communication interface module (VCIM) has a specific set of unique numbers that tie the module to each vehicle. These
numbers, the 10-digit station identification and the 11-digit electronic serial number, are used by the National Cellular Network and OnStar(R) to
identify the specific vehicle. Because these numbers are tied to the vehicle identification number of the vehicle, you must never exchange these parts
with those of another vehicle.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
2. Position the seat to the most rearward position.
3. Disconnect two vehicle communication interface module electrical connectors (1).
4. Disconnect the cellular antenna and the navigation radio antenna connectors (1).