Vibe FWD L4-1.8L VIN L (2005)
6. Insert a wood dowel (1) into the hole in the right side of the crossmember (3) and the hole in the body.
7. Use the dowel in order to align the bolt holes.
8. Install the 2 bolts (1, 2) to the crossmember.
9. Insert a wood dowel into the hole in the left side of the crossmember and the hole in the body.
10. Use the dowel in order to align the bolt holes.
11. Install the 2 bolts to the crossmember (3, 4).
12. Insert a wood dowel into the hole in the right side of the crossmember and the hole in the body.
13. Use the dowel in order to align the bolt holes.
Notice: Refer to Fastener Notice in Cautions and Notices.
14. Install the bolt (7).
Tighten the bolt to 157 N.m (115.8 lb ft).
15. Install the bolt (1).
Tighten the bolt to 113 N.m (83.3 lb ft).
16. Insert a wood dowel into the hole in the left side of the crossmember and the hole in the body.
17. Use the dowel in order to align the bolt holes.
18. Install the bolt (4).
Tighten the bolt to 157 N.m (115.8 lb ft).
