Vibe FWD L4-1.8L VIN L (2005)
6. Install the floor carpet retainers (2) to each door opening.
7. Install the 3 plastic retainers (1) which secure the front of the floor panel carpet (6).
8. Reposition the rear seat assembly and install the 4 front retaining bolts.
Tighten the bolts to 18 N.m (13 lb ft).
9. Install the compact disc player, if removed. Refer to CD Player Replacement in Entertainment.
10. Install the accessory AC/DC power control module. Refer to AC/DC Power Outlet Control Module Replacement in Power Outlets.
11. Install the front seats. Refer to Seat Replacement - Front Bucket (See: Seats/Service and Repair/Seat Replacement - Front Bucket) in Seats.
12. Install the rear floor console. Refer to Console Replacement - Rear Floor (See: Console/Service and Repair/Console Replacement - Rear Floor) in
Instrument Panel, Gages, and Console.
13. Install the front floor console. Refer to Console Replacement - Front Floor (See: Console/Service and Repair/Console Replacement - Front Floor)
in Instrument Panel, Gages, and Console.
14. Install the center pillar lower trim panels. Refer to Trim Panel Replacement - Lower Center Pillar (See: Trim Panel/Service and Repair/Trim
Panel Replacement - Lower Center Pillar) .
15. Install all 4 side door sill trim plates. Refer to Door Sill Plate Replacement (See: Scuff Plate/Service and Repair/Removal and Replacement/Door
Sill Plate Replacement) .
16. Install the body hinge pillar trim panels. Refer to Trim Replacement - Hinge Pillar (See: Trim Panel/Service and Repair/Trim Replacement -
Hinge Pillar) .
17. Install the floor mats, if equipped.
18. Enable the SIR system. Refer to SIR Disabling and Enabling Zones in SIR.
