Vibe FWD L4-1.8L VIN L (2005)
1. Install the headlining trim finish panel (1) through a rear door.
2. Install the headlining panel (1) to the roof panel. Secure the headlining panel with the rear 2 retainers (2).
3. Install the quarter upper trim panel. Refer to Trim Panel Replacement - Rear Quarter Upper (See: Trim Panel/Service and Repair/Trim Panel
Replacement - Rear Quarter Upper) .
4. Install the dome lamp. Refer to Dome Lamp Replacement in Lighting Systems.
5. Install the courtesy and reading lamp/sunroof switch assembly, if removed. Refer to Sunroof Switch Replacement (See: Roof and Associated
Components/Sunroof / Moonroof/Sunroof / Moonroof Switch/Service and Repair/Removal and Replacement) in Roof.
6. Install the sunshades and retainers. Refer to Sunshade Replacement (See: Sun Visor/Service and Repair/Removal and Replacement/Sunshade
Replacement) .
7. Install the windshield side garnish moldings (1) to the vehicle. Ensure that the plastic retainers are fully engaged.
8. Install the assist handles. Refer to Assist Handle Replacement (See: Passenger Assist Handle/Service and Repair) .
9. Install the center pillar upper trim panel. Refer to Trim Panel Replacement - Upper Center Pillar (See: Trim Panel/Service and Repair) .
10. Reposition the door opening frame garnish moldings (1, 2) on all doors to the correct position on the pinch well flange.
11. Position the front seat back cushions back to the upright position.
12. Enable the air bag system. Refer to SIR Disabling and Enabling Zones in SIR.