Vibe FWD L4-1.8L VIN L (2005)
6. Install the sunroof sunshade to the sunroof housing. Secure the sunshade with the following components:
-
The 2 sunroof sunshade stops
-
The screw (2) which secures each stop (1)
7. With the aid of an assistant, install the sunroof housing (2) to the vehicle.
8. Install the 6 nuts, to the sunroof housing and hand tighten at this time.
NOTE: Refer to Fastener Notice in Service Precautions.
9. Install the 4 brackets (1) which secure the sunroof housing (2).
10. Install the 8 bolts, to the brackets (1) and hand tighten at this time.
11. Tighten the sunroof housing nuts according to the torque sequence.
Tighten the sunroof housing nuts to 5.5 N.m (49 lb in).
