Vibe FWD L4-1.8L VIN L (2005)
1. Install the front side door window/lock switch (3) to the front side door accessory switch mounting plate (2). Secure the switch with the 3 screws
(1).
2. Connect the front side door window/lock switch electrical connector (2).
3. Position the front side door accessory switch mounting plate (2) to the front side door trim (1), and slide rearward, making sure the retaining tabs
are engaged.
Power Mirror Switch Replacement
POWER MIRROR SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the left I/P accessory trim plate.
2. Disconnect the electrical connectors.
3. Using a taped flat-bladed tool, gently pry and release the 4 clips around the lamp dimmer switch/remote control rearview mirror switch trim plate
(2).
4. Using a taped flat bladed tool, gently pry and release the clips around the power mirror switch (1).
INSTALLATION PROCEDURE