Vibe FWD L4-1.8L VIN L (2005)
7. Install the rear tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
8. Remove the rear center console. Refer to Console Replacement - Rear Floor in Instrument Panel Gages and Console.
9. Loosen the lock nut (1).
10. Turn the adjusting nut (2) in order to adjust the park brake lever travel. Refer to the Inspection Procedure above.
11. Tighten the lock nut.
Tighten
Tighten the nut to 5.0 N.m (44.25 lb in)
12. Install the rear center console. Refer to Console Replacement - Rear Floor in Instrument Panel Gages and Console.