Vibe FWD L4-1.8L VIN L (2005)
Cruise Control Servo Cable: Service and Repair
CRUISE CONTROL CABLE REPLACEMENT
REMOVAL PROCEDURE
1. Loosen the cable adjusting locknuts (1).
2. Remove the cruise control servo cable (2) from the bracket.
3. Remove the cruise control cable (2) from the throttle lever (3).Opening the throttle lever by hand will aide in the removal of the cruise cable.
4. Remove the cruise control servo cover (1) by applying slight outward pressure to both sides at the base of the cover (2).
5. Remove the cruise control cable bracket screw (5).
6. Remove the cruise control cable (4) from the bracket.
7. Remove the cruise control cable (4) from the servo lever (1).
8. Remove the cruise control servo cable from the vehicle by removing the cable from the cable guide clips.
INSTALLATION PROCEDURE
1. Install the cruise control servo cable (4) to the servo lever (1).
2. Install the cruise control cable (4) to the bracket. Secure the cable with the screw (5).
