Vibe FWD L4-1.8L VIN L (2005)
11. Align the camshaft timing sprockets.
12. Disconnect the power steering oil pressure switch connector.
13. Raise and properly support the vehicle. Refer to Vehicle Lifting.
14. Remove the right side engine splash shield.
15. Remove the 2 power steering pump through bolts and the nuts (1).
16. Remove the power steering pump from the mounting surface.
Move the pump to the side.
17. Remove the crankshaft pulley retaining bolt using J 8614-01.
18. Remove the crankshaft pulley.
