Vibe FWD L4-1.8L VIN L (2005)
6. Remove the 2 timing chain tensioner bolts (1, 2).
7. Remove the timing chain tensioner.
Installation Procedure
1. Release the ratchet pawl.
2. Fully depress the plunger (4). Apply the hook (2) to the pin (3).
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the timing chain tensioner into the timing chain cover. Secure the timing chain tensioner using 2 bolts (1).
^
Tighten the timing chain tensioner bolts to 9 Nm (80 inch lbs.).
4. Rotate the engine approximately 1 revolution in order to release the plunger on the timing chain tensioner.